服務熱線：4007-1100-10
規格：25KG/BAG
所屬類型：其它原材料
品牌：
型號：Cycoloy PC/ABS C6200
性能：阻燃級，阻燃PC/ABS 耐熱級。
|
CYCOLOY™Resin C6200 | SI | |British | |Metric | | Americas: COMMERCIAL |
| Non-chlorinated, nombrominated flame retardant PC/ABS offering balanced heat, flow and impact to meet various application needs. |
| Property |
| TYPICAL PROPERTIES(1) | ||||
| MECHANICAL | Value | Unit | Standard | |
| Tensile Stress, yld, Type I, 50 mm/min | 680 | kgf/cm2 | ASTM D 638 | |
| Tensile Strain, brk, Type I, 50 mm/min | 50 | % | ASTM D 638 | |
| Flexural Stress, yld, 2.6 mm/min, 100 mm span | 1050 | kgf/cm2 | ASTM D 790 | |
| Flexural Modulus, 2.6 mm/min, 100 mm span | 27400 | kgf/cm2 | ASTM D 790 | |
| IMPACT | Value | Unit | Standard | |
| Izod Impact, notched, 23°C | 54 | cm-kgf/cm | ASTM D 256 | |
| Instrumented Impact Energy @ peak, 23°C | 622 | cm-kgf | ASTM D 3763 | |
| Instrumented Impact Energy @ peak, -30 | 553 | cm-kgf | ASTM D 3763 | |
| THERMAL | Value | Unit | Standard | |
| HDT, 1.82 MPa, 3.2mm, unannealed | 87 | °C | ASTM D 648 | |
| HDT, 1.82 MPa, 6.4 mm, unannealed | 90 | °C | ASTM D 648 | |
| Relative Temp Index, Elec | 85 | °C | UL 746B | |
| Relative Temp Index, Mech w/impact | 85 | °C | UL 746B | |
| Relative Temp Index, Mech w/o impact | 85 | °C | UL 746B | |
| PHYSICAL | Value | Unit | Standard | |
| Specific Gravity | 1.18 | - | ASTM D 792 | |
| Mold Shrinkage, flow, 3.2 mm (5) | 0.4 - 0.6 | % | SABIC Method | |
| Mold Shrinkage, xflow, 3.2 mm (5) | 0.4 - 0.6 | % | SABIC Method | |
| Melt Flow Rate, 260°C/2.16 kgf | 14.5 | g/10 min | ASTM D 1238 | |
| Spiral Flow,260°C,10 ips,3.175 X 1524 mm | 685.8 | mm | - | |
| ELECTRICAL | Value | Unit | Standard | |
| Arc Resistance, Tungsten {PLC} | 6 | PLC Code | ASTM D 495 | |
| Hot Wire Ignition {PLC) | 2 | PLC Code | UL 746A | |
| High Voltage Arc Track Rate {PLC} | 3 | PLC Code | UL 746A | |
| High Ampere Arc Ign, surface {PLC} | 0 | PLC Code | UL 746A | |
| Comparative Tracking Index (UL) {PLC} | 2 | PLC Code | UL 746A | |
| Volume Resistivity | >1.E+15 | Ohm-cm | IEC 60093 | |
| Surface Resistivity, ROA | >1.E+15 | Ohm | IEC 60093 | |
| Dielectric Strength, in oil, 0.8 mm | 35 | kV/mm | IEC 60243-1 | |
| Dielectric Strength, in oil, 1.6 mm | 25 | kV/mm | IEC 60243-1 | |
| Dielectric Strength, in oil, 3.2 mm | 17 | kV/mm | IEC 60243-1 | |
| Relative Permittivity, 1 MHz | 2.7 | - | IEC 60250 | |
| Dissipation Factor, 50/60 Hz | 0.004 | - | IEC 60250 | |
| Dissipation Factor, 1 MHz | 0.008 | - | IEC 60250 | |
| Relative Permittivity, 50/60 Hz | 2.8 | - | IEC 60250 | |
| FLAME CHARACTERISTICS | Value | Unit | Standard | |
| UL Recognized, 94HB Flame Class Rating (3) | 0.71 | mm | UL 94 | |
| UL Recognized, 94V-1 Flame Class Rating (3) | 1.21 | mm | UL 94 | |
| UL Recognized, 94V-0 Flame Class Rating (3) | 1.47 | mm | UL 94 | |
| UL Recognized, 94-5VA Rating (3) | 3.4 | mm | UL 94 | |
| UL Recognized, 94-5VB Rating (3) | 2 | mm | UL 94 | |
| Source GMD, last updated:2000/01/05 |
| Processing |
| Parameter | ||
| Injection Molding | Value | Unit |
| Drying Temperature | 80 - 90 | °C |
| Drying Time | 3 - 4 | hrs |
| Drying Time (Cumulative) | 8 | hrs |
| Maximum Moisture Content | 0.04 | % |
| Melt Temperature | 245 - 275 | °C |
| Nozzle Temperature | 245 - 275 | °C |
| Front - Zone 3 Temperature | 245 - 275 | °C |
| Middle - Zone 2 Temperature | 220 - 275 | °C |
| Rear - Zone 1 Temperature | 220 - 255 | °C |
| Mold Temperature | 60 - 80 | °C |
| Back Pressure | 0.3 - 0.7 | MPa |
| Screw Speed | 40 - 70 | rpm |
| Shot to Cylinder Size | 30 - 80 | % |
| Vent Depth | 0.038 - 0.076 | mm |
蘇州洪大塑膠有限公司銷售 25KG/BAG，針對 25KG/BAG客戶提供相關咨詢服務，需要了解 25KG/BAG型號尺寸、重量、價格、安裝、維護等資料請與我們聯系。
蘇州洪大塑膠有限公司
經營模式：貿易型
所在地區：江蘇 蘇州
掃碼打電話